China Nanfeng Electric
86-577-62797256 king@kingnan.com

News

DC Contactor ZJW200 Supplier

Zhejiang Nanfeng Electric Co.,Ltd. is a company.With DC contactor as the leading factor, it integrates production, R & D, manufacturing anAn enterprise that can be integrated. Our company is specialized in producing medium load and heavy load DC contactor is suitable for electric forklifts, battery cars, tractors, and excavating. Machine, automobile air conditioner, communication power supply, uninterrupted power supply, electroplating power supply, etc. system The switch control of the integrated electronic control circuit has the advantages of small volume and large load capacity. Long service life, simple maintenance, wide application range, and well received by users. Welcome.

TEL: +86-577-62797256 62776658

FAX:+86-577-62797257

EMAIL:king@kingnan.com

 

product description

ZJW200-30 DC Contactor

DC Contactor ZJW200 Supplier_ZJW200-30 DC Contactor

Application

The product is mainly used in the EPS power supply of the communication base station, and the contacts can also be used for AC loads of 380V, 220V and 110V. The product coil is DC powered,

Ordering Notice

For example: ZJW200-30S/12V

The DC contactor of main contact is 3NO, with micro switch, vertical installation, rated voltage not more than DC80V, current 200A, coil voltage is

Electric Parameters

Contact type 2 NO+2NC of bridge type Instantaneous maxi (closing) current 7Ie,≤1s
Rated voltage of contacts (DC) DC: 80V; AC: 380V Insulation resistance(MΩ) ≥100
Rated current of contacts (A) DC: 200; AC: 60 Dielectric withstand voltage 2500V,p.f. 1min, no breakdown
Voltage drop on contacts(mV) ≤80(at 100A) Electric cycles (104) ≥2
Coil voltage specification(DC) 6~220V Mechanical cycles (104) ≥30
DC power consumption of coil (W) ≤28 Temperature rise on outgoing terminal ≤65
Pickup voltage(DC) ≤70%Ue Temperature rise of coil(K) ≤85
Release voltage(DC) ≥5%Us;≤40%Us Insulation grade of enameled wire Class B (130°C)
Pickup time(ms) ≤30 Material of contact AgCuO(10)/Cu
Release time(ms) ≤50 Working duty Continuous operating duty

 

ZJW200-22 DC Contactor

DC Contactor ZJW200 Supplier_ZJW200-22 DC Contactor

Application

The product is mainly used in the EPS power supply of the communication base station, and the contacts can also be used for AC loads of 380V, 220V and 110V. The product coil is DC powered,

Ordering Notice

For example: ZJW200-22S/12V

The DC contactor of main contact is 2NO, with micro switch, vertical installation, rated voltage not more than DC80V, current 200A, coil voltage is

Electric Parameters

Contact type 2 NO+2NC of bridge type Instantaneous maxi (closing) current 7Ie,≤1s
Rated voltage of contacts (DC) DC: 80V; AC: 380V Insulation resistance(MΩ) ≥100
Rated current of contacts (A) DC: 200; AC: 60 Dielectric withstand voltage 2500V,p.f. 1min, no breakdown
Voltage drop on contacts(mV) ≤80(at 100A) Electric cycles (104) ≥2
Coil voltage specification(DC) 6~220V Mechanical cycles (104) ≥30
DC power consumption of coil (W) ≤28 Temperature rise on outgoing terminal ≤65
Pickup voltage(DC) ≤70%Ue Temperature rise of coil(K) ≤85
Release voltage(DC) ≥5%Us;≤40%Us Insulation grade of enameled wire Class B (130°C)
Pickup time(ms) ≤30 Material of contact AgCuO(10)/Cu
Release time(ms) ≤50 Working duty Continuous operating duty
Hot News
DC Contactor Vendor
DC Contactor Vendor

The product is mainly used in the EPS power supply of the communicatio

DC contactor manufacturer recommend
DC contactor manufacturer recommend

The product is mainly used in the EPS power supply of the communicatio

DC contactor supplier recommend
DC contactor supplier recommend

The product is mainly used in the EPS power supply of the communicatio

DC contactor supplier introduction
DC contactor supplier introduction

The product is mainly used in the EPS power supply of the communicatio

Recommend Products